China Transmission Worm Gear Series Double Enveloping Worm Gear Worm Gearbox double stage worm gearbox

Merchandise Description

Transmission Worm Equipment Collection Double Enveloping Worm Equipment Worm Gearbox

Item Description
Collection C  double enveloping worm gear
Model: 100 – 500
Ratio: ten -sixty three
Output Torque : 683 – 51180 N.m
Ranking Energy : forty seven/25HP(1.41Kw) – 597HP(448Kw)

 

In a Worm Gearbox, Worm Reduction Equipment Box, Worm Speed Reducer and Gear Motor Producer, three to 11 equipment teeth are generally in make contact with with the worm, based CZPT the ratio. The improved number of pushed gear enamel that are in contact with the worm substantially boosts torque capacity also raises shock load resistance. In addition to escalating the amount of pushed gear teeth in make contact with with the worm, Worm Gearbox, Worm Reduction Equipment Box, Worm Speed Reducer and Equipment Motor Manufacturer also raises the make contact with location on every single gear tooth. The actual regions of instantaneous make contact with in between the worm threads and the driven equipment tooth are traces. These lines of get in touch with go throughout the encounter of the gear tooth as it progresses by means of its complete time of mesh with the worm. The lines of get in touch with in double-enveloping worm gearing are configured to enhance the electrical power transmission capacity and reduce the stress on each gear tooth.

 

Functioning problems

Two shafts for ninety ° Intersect, enter speed must not be far more than 1500 rpm.The working environment temperature should range from  0 ~ 40 ° C, when the atmosphere temperature under ° C or over forty ° C.Before commencing the lubricating oil to corresponding heating and cooling, The worm shafts, reverse procedure can be positive.

Information sheet on CUW double enveloping worm equipment reducer :

Model ShaftDia. (mm) Center Height (CUW) (CUW) Output shaft Dia. Electricity Ratio Permitted Torque Excess weight
(CUW) input Solid(h6) (mm) (mm) (kw) (Nm) (KGS)
a hundred 28 190 forty eight 1.forty one~eleven.5 10 .twenty five~ 62 683-1094 forty two
125 32 225 fifty five two.42~19.7 10 .25 ~ 62 1170~2221 65
a hundred and forty 38 255 sixty five three.94~25.nine 10 .25 ~ 62 1555 ~ 3473 85
one hundred sixty 42 290 70 four.39~35.seven 10 .25 ~ 62 2143 ~4212 one hundred twenty
one hundred eighty 48 320 80 5.83~47.five 10 .25 ~ 62 2812 ~ 5387 a hundred and seventy
200 55 350 ninety 7.52 ~61.2 10 .25 ~ 62 3624 ~6859 220
225 sixty 390 one hundred 9.9~81.4 10 .25 ~ 62 4872 ~ 9224 290
250 65 430 a hundred and ten 12.9 ~one hundred and five 10 .25~ 62 6284~11892 380
280 70 480 120 sixteen.9 ~ 138 10 .25 ~ 62 8347 ~ 15820 520
315 seventy five 530 140 22.5 ~183 10 .25 ~ 62 11068~ 19450 seven-hundred
355 80 595 a hundred and fifty 30~245 10 .25 ~ 62 14818 ~28014  1030
four hundred ninety 660 one hundred seventy 32.1 ~261 10 .25 ~ 62 15786~29918 1400
450 a hundred 740 190 42.6 ~347 10 .25 ~ 62 2571~39881 1980
five hundred 110 815 210 54.9 ~ 448 10 .25 ~ 62 27097~51180 270

 


/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Single-Step

###

Samples:
US$ 2000/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Model ShaftDia. (mm) Center Height (CUW) (CUW) Output shaft Dia. Power Ratio Permitted Torque Weight
(CUW) input Solid(h6) (mm) (mm) (kw) (Nm) (KGS)
100 28 190 48 1.41~11.5 10 .25~ 62 683-1094 42
125 32 225 55 2.42~19.7 10 .25 ~ 62 1170~2221 65
140 38 255 65 3.94~25.9 10 .25 ~ 62 1555 ~ 3473 85
160 42 290 70 4.39~35.7 10 .25 ~ 62 2143 ~4212 120
180 48 320 80 5.83~47.5 10 .25 ~ 62 2812 ~ 5387 170
200 55 350 90 7.52 ~61.2 10 .25 ~ 62 3624 ~6859 220
225 60 390 100 9.9~81.4 10 .25 ~ 62 4872 ~ 9224 290
250 65 430 110 12.9 ~105 10 .25~ 62 6284~11892 380
280 70 480 120 16.9 ~ 138 10 .25 ~ 62 8347 ~ 15820 520
315 75 530 140 22.5 ~183 10 .25 ~ 62 11068~ 19450 700
355 80 595 150 30~245 10 .25 ~ 62 14818 ~28014  1030
400 90 660 170 32.1 ~261 10 .25 ~ 62 15786~29918 1400
450 100 740 190 42.6 ~347 10 .25 ~ 62 20998~39881 1980
500 110 815 210 54.9 ~ 448 10 .25 ~ 62 27097~51180 270

/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Single-Step

###

Samples:
US$ 2000/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Model ShaftDia. (mm) Center Height (CUW) (CUW) Output shaft Dia. Power Ratio Permitted Torque Weight
(CUW) input Solid(h6) (mm) (mm) (kw) (Nm) (KGS)
100 28 190 48 1.41~11.5 10 .25~ 62 683-1094 42
125 32 225 55 2.42~19.7 10 .25 ~ 62 1170~2221 65
140 38 255 65 3.94~25.9 10 .25 ~ 62 1555 ~ 3473 85
160 42 290 70 4.39~35.7 10 .25 ~ 62 2143 ~4212 120
180 48 320 80 5.83~47.5 10 .25 ~ 62 2812 ~ 5387 170
200 55 350 90 7.52 ~61.2 10 .25 ~ 62 3624 ~6859 220
225 60 390 100 9.9~81.4 10 .25 ~ 62 4872 ~ 9224 290
250 65 430 110 12.9 ~105 10 .25~ 62 6284~11892 380
280 70 480 120 16.9 ~ 138 10 .25 ~ 62 8347 ~ 15820 520
315 75 530 140 22.5 ~183 10 .25 ~ 62 11068~ 19450 700
355 80 595 150 30~245 10 .25 ~ 62 14818 ~28014  1030
400 90 660 170 32.1 ~261 10 .25 ~ 62 15786~29918 1400
450 100 740 190 42.6 ~347 10 .25 ~ 62 20998~39881 1980
500 110 815 210 54.9 ~ 448 10 .25 ~ 62 27097~51180 270

A-Drive PWC single worm reducer gearbox

A worm gear is a gear used to reduce the speed of a mechanical device. Often used in the automotive and shipbuilding industries, these gears have a lifespan comparable to many other types of reducer gearboxes. As a result, worm gears continue to be popular with engineers.
worm reducer

Agknx driver

Conical drive worm reducer gearboxes are an excellent choice for a variety of applications. The double-enveloping worm gear geometry of the Agknx Drive reducer gearbox provides a larger contact area and higher torque carrying capacity. This specialized gear system is also ideal for applications requiring higher precision.
Agknx Drive’s products are ideal for the solar, packaging, steel, food and pulp and paper industries. Additionally, Agknx Drive’s products are ideal for motion control and medium to heavy duty applications. The company’s dedicated sales and service teams are available to assist with your specific needs.
Agknx drive worm gear reducer gearboxes are available in single, double and triple reductions. Depending on the application, a single stage unit can transport up to 7,500 lbs. of torque. Its low-cost, compact design makes it a convenient option. Conical drive gearboxes are versatile and durable.
X & H

X & H worm gear units feature worm gear sets and are available in two different series. The X-Series includes XA versions with shaft and XF to XC versions with motor mounts. Compared to the XC compact series, the XF series offers outstanding versatility and higher efficiency. The H series combines the features of the X series with a spur gear pre-stage on the input. The H series has a die cast aluminum housing and cast iron shaft.
The X & H Worm reducer gearbox Series “H” helical gears are compatible with NMRV and C side input 56F wired motors. These gear reducer gearboxes are low cost and easy to install. They feature a cast iron housing and four threaded mounting holes.
RV seriese aluminum right angle

RV seriese aluminum right angle worm reduces versatility and durability. They are available in a variety of sizes including 25, 30, 40, 50, 63, 75, 110, 130, 150. Featuring standard NEMA motor input flanges and torque arm or foot mounting options, these reducer gearboxes are ideal for a variety of applications.
RV series worm gear reducer gearbox is made of high-quality aluminum alloy with compact structure. It also features light weight, corrosion resistance and low noise. Its housing is made of die-cast aluminum alloy, while the worm gear is made of 20CrM. The worm gear is heat treated by carbon quenching to increase its hardness. The thickness of the carbide layer is between 0.3-0.5mm.
These worm gear reducer gearboxes have multiple functions to maximize efficiency. In addition to being corrosion resistant, they are available in a variety of sizes to suit any application. Other features include a corrosion-resistant cast iron housing, enclosed breather, double-lip seal and magnetic drain plug. These worm gear reducer gearboxes are available with single or dual input shafts and are interchangeable with NMRVs.
Aluminum alloy right angle worm reducer gearbox is a light, durable and efficient gear reduction device. Its compact design makes it lighter than other gearheads, while its rust-resistant surface and long life make it an excellent choice for industrial and automotive applications. It is available in a variety of sizes, including inches.
worm reducerAGknx Single

Worm reducer gearboxes can be classified as sacrificial gears. It is used to reduce the torque of the machine. It has two parts: a worm and wheels. The worm can be made of brass or steel. Brass worm gears corrode easily. Phosphorus EP gear fluid can run on brass worm gears. It creates a thin oxide layer on the gear teeth, protecting them from impact forces and extreme mechanical conditions. Unfortunately, it can also cause serious damage to the brass wheels.
Worm reducer gearboxes work by transferring energy only when the worm is sliding. This process wears away the lubricating layer and metal of the wheel. Eventually, the worm surface reaches the top of the wheel and absorbs more lubricant. This process will repeat itself in the next revolution.
Worm reducer gearboxes have two benefits: they are compact and take up little space. They can slow down high-output motors while maintaining their torque. Another important feature of the worm gear reducer gearbox is its high transmission ratio capability. It can be installed in both vertical and horizontal positions, and a bidirectional version is also available.
Worm gears have some complications compared to standard gear sets, but overall they are reliable and durable. Proper installation and lubrication can make them sturdy, efficient devices.
A-Drive AGknx Single

If you’re considering purchasing a new worm gear reducer gearbox for your A-Drive AGknx single, you need to understand your goals. While single-stage worm reducer gearboxes can be used, their reduction ratios are often limited. In most cases, they can only achieve a reduction ratio of 10:1. However, there are other types of gears that provide additional speed reduction capabilities.
The worm reducer gearbox consists of two parts: the input worm and the output worm. Each component has its own rotational speed, the input worm rotates in a single direction and the output worm wheel rotates vertically. In a five-to-one ratio, the input worm rotates five times for each output worm. Likewise, a 60-to-1 ratio requires 60 revolutions of each worm. Due to this arrangement, the worm reducer gearbox is inefficient. Gear reduction is inefficient due to sliding friction rather than rolling friction.
Worm reducer gearboxes are also susceptible to thermal stress. They run hotter than hypoid reducer gearboxes, which reduces their useful life. In addition to higher heat, worm reducer gearboxes can experience component failure over time. In addition, an oil change is imminent due to the deterioration of lubrication.
The worm gear reducer gearbox of the A-Drive PPC single is a direct drive gearbox for personal watercraft. It has bronze bushings, aluminum gears, and a spool box. The spool box has a quarter-inch plated spool to wrap 1/4-inch 7 x 19 aircraft cable. Its design also makes it a more efficient alternative to belt-driven AGknx cranes.
worm reducerAGknx X & H

The AGknx X & H worm gear reducer gearbox series is a high-performance universal mount worm gear reducer gearbox. It features a spur gear primary on the input for higher performance and a wider range of gear ratios. Its design also allows it to be used with a variety of input shaft types, including shaft and closed-coupled applications.
It is available in a variety of sizes, including popular frame sizes 90 and 110. The worm shaft is made of case-hardened alloy steel with a cast iron hub and bronze ring gear. The standard output shaft is hollow. There are also models with dual single-shaft outputs.

China Transmission Worm Gear Series Double Enveloping Worm Gear Worm Gearbox     double stage worm gearboxChina Transmission Worm Gear Series Double Enveloping Worm Gear Worm Gearbox     double stage worm gearbox
editor by CX 2023-03-31